Siemens 1200CT (CPU)
In Germany, Siemens always was the primary electronics 
		manufacturer. Since 1950s they are involved in telecommunication devices 
		production and they made most German telephone switching machines. Among 
		telephones, typewriters and computers they produced teletypes since 
		1950s or even earlier. First teletypes were mechanical, using mechanical 
		multiplexers and electric typewriter mechanisms as printers. But the 
		last ones were fully computerized.
		Computerized teletypes line, Siemens T1000, started in 1980s with 
		all-in-one teletype systems which look like electric typewriter with 
		additional box for electronics and display. They contained a complete 
		dedicated system which included teletype equipment and printer. 
		Everything except floppy disk drive was enclosed in a large, single 
		casing. Later, smaller T1200 versions with built-in printer(T1200SD) 
		came out as well as versions containing monitor and floppy disk drives 
		to store messages and templates. First attempt of T1200 with CRT was
		1200BS with not easily detachable monitor. 
		Inside, they still contained dedicated computer system. But later, 
		Siemens released another machine: The T1200CT. 
		1200CT has a complete IBM PC XT clone inside, implemented on a single 
		ISA board. Teletype logic and modem are on separate ISA board. Monitor 
		and printer are detachable and PC compatible. Although PC XT keyboard 
		may be used, the original keyboard is different as it has teletype keys. 
		The computer has a single 3.5" 720kB floppy disk drive as storage. 
		Additionally, battery-backed RTC and memory for text is present.
		I don't know if Siemens manufactured any teletypes after this one. As in 
		Germany in early 1990s Teletype service was phased out, 1200CT was 
		mainly sold in countries other than Germany. It has localized firmware 
		to be used in other countries.
| Manufacturer | Siemens | |
| Origin | Germany (West) | |
| Year of unit | 1991 | |
| Year of introduction | 1988? | |
| Class | XT | |
| CPU | Intel 8088 | |
| Speed | 8MHz | |
| RAM | 512kB | |
| ROM | BIOS, Teletype environment (640kB) | |
| Graphics | 80x25 Text, CGA-compatible? | |
| Sound | PC Speaker | |
| System expansion bus | 8-bit ISA | |
| Floppy/removable media drives | 1x 3.5" 720kB floppy disk drive | |
| Hard disk: | None | |
| 
				 
  | 
			||
| 
				 Peripherals in collection:  | 
			||
| Other boards: 
  | 
				Teletype board with its of in-ROM OS (probably MS-DOS 3.2 or 4.0) | |
| Non-standard expansions: | - | |
| Operating system(s): | MS-DOS | 
| 
				 
  | 
				![]()  | 
			
| Contents: | Starting, usage | Links | 
Starting
Remember to remove rechargeable battery from teletype board! It will leak and destroy electronics!
After Award BIOS, the PC tries to boot from ROMs and if it fails, from floppy drive. By default it boots from 640kB of ROM present on teletype board. It runs embedded DOS and probably compressed teletype program. From this programt here is no way to escape to DOS.
The "ON/OFF" switch present on teletype board turns embedded rechargeable battery on and off and it has nothing to cards boot-up at all.
To boot the system from floppy disk, you have to remove teletype board. Disassemble the PC by releasing two latches from top on the rear. Open the cover towards front. Loosen two screws and by pressing plastic bracket pull the CPU shield from the computer, loosen its screws, remove cover and you are inside.
I think that it may be possible to install a HDD in it by using these small controller boards with MFM/RLL hard drives installed on their rear in a metal skeleton.
		
		http://old.fernschreibamt-hausneindorf.de/html/sonstiges.html - Look 
		for "Die ganze Textleistung" - cover of manual?
		
		http://www.teleprinter.net/english/inhalt/t1_e.shtml - According to 
		this page T1200BS is the last produced model by Siemens. Well, not.
		
		http://www.phantom.sannata.ru/forum/index.php?t=12416 - Pictures of 
		T1200BS internals.